On this page
When your emails stop working, every minute of downtime can cost your business sales, clients, and credibility. According to the Validity 2025 Email Deliverability Benchmark Report, the global inbox placement rate sits at just 83.5%, meaning roughly one in six legitimate marketing emails never reaches the inbox. For business emails specifically, the problem can be even worse because most senders do not know where to start.
If you are wondering what to do if your emails are not working, this guide breaks the problem into 8 actionable steps you can follow right now.
Step 1: If You Are Not Receiving Emails, Check Your MX Records
If people tell you their messages bounce, or mail simply stops arriving, start with your domain's MX (mail exchanger) records. MX records tell every sending server where to deliver email for your domain. If they are missing, mistyped, or still point to a provider you have left, incoming email goes to the wrong place or nowhere at all.
Look up your current MX records with a free tool such as the MXToolbox MX Lookup, the Yeevu MX Lookup or Google Admin Toolbox Dig, or run nslookup -type=mx yourdomain.com in a terminal. Then compare the result with the records your email provider publishes. These are the MX records for the most popular business email providers:
| Email provider | MX record | Priority |
|---|---|---|
| Google Workspace | smtp.google.com | 1 |
| Microsoft 365 | yourdomain-com.mail.protection.outlook.com(your domain, with each dot replaced by a hyphen) | 0 |
| Zoho Mail | mx.zoho.commx2.zoho.commx3.zoho.com | 10 20 50 |
| Proton Mail | mail.protonmail.chmailsec.protonmail.ch | 10 20 |
| Fastmail | in1-smtp.messagingengine.comin2-smtp.messagingengine.com | 10 20 |
| iCloud+ Custom Email Domain | mx01.mail.icloud.commx02.mail.icloud.com | 10 10 |
A few notes on these values:
- Google Workspace: domains set up before 2023 may use the older five-record set starting with
aspmx.l.google.com. Those records still work, so you do not need to change them (Google). - Microsoft 365: the MX record starts with your own domain name, with each dot replaced by a hyphen. For example,
example.comusesexample-com.mail.protection.outlook.comandexample.co.ukusesexample-co-uk.mail.protection.outlook.com. To confirm the exact value, open the Microsoft 365 admin centre and go to Settings, then Domains (Microsoft). - Zoho Mail: the values above are for the US data centre. Accounts hosted in other regions use a regional hostname, such as
mx.zoho.eufor Europe (Zoho).
The MX problems that most often stop incoming email are:
- MX records still pointing to your old provider after a migration
- Records from two different providers mixed together, so mail is split between them
- No MX records at all, often after a domain transfer or a change of nameservers
- A recent change that has not finished propagating, which can take up to 48 hours
If your MX records match your provider and mail is still not arriving, check whether the mailbox is full and whether a forwarding rule or filter is moving messages elsewhere. If the problem is with sending rather than receiving, continue to Step 2.
Step 2: Determine Whether the Email Is Failing to Send or Failing to Deliver
These are two different problems. An email that fails to send means it never leaves your outbox or mail app. An email that sends but never arrives at the recipient is a deliverability problem. The Hostinger email troubleshooting guide recommends checking your Outbox and Drafts folder, since a message stuck there has not actually gone out.
If the message disappears from your outbox but never reaches the recipient, the problem is on the delivery side, and you should move to Step 4.
Step 3: Check Your SMTP Settings and Port Configuration
If your email client cannot connect to the outgoing server, the SMTP settings are the most common culprit. The standard values are:
- SMTP port: 587 with STARTTLS (modern default) or 465 with SSL
- SMTP server: Provided by your email host (e.g., smtp.gmail.com, smtp.office365.com)
- Username: Your full email address
- Authentication: Must be enabled
Port 25 is blocked by most internet service providers and hosting platforms, so avoid it. If webmail works but your desktop or mobile app does not, the issue is in your app's configuration, not your account (Hostinger).
Step 4: Check Your SPF, DKIM, and DMARC Records
Email authentication is the single biggest factor in whether your messages reach the inbox. SPF lists the servers allowed to send as your domain, DKIM signs each message cryptographically, and DMARC tells receiving servers what to do when authentication fails.
According to the Sinch Mailgun State of Email Deliverability report, only 53.8% of senders had implemented DMARC in 2024, up from 42.6% in 2023. That means nearly half of all senders are operating without DMARC protection. Even more concerning, the Validity report found that over 90% of new DMARC adopters set their policy to "None," which means receivers take no action even when authentication fails.
Common authentication mistakes include:
- Two SPF records on one domain (only one is allowed)
- An SPF record exceeding the 10-DNS-lookup limit
- Missing DKIM keys for third-party tools like invoicing software or CRMs
- DMARC policy set to "None" instead of "Quarantine" or "Reject"
Step 5: Check Whether Your Domain or IP Is on a Blocklist
A compromised mailbox, a purchased email list, or a shared server used by another sender can place your domain or IP on a blocklist such as Spamhaus. The Sinch report found that 53% of senders do not monitor email blocklists for their sending domains and IPs. You can check your status using free tools like MXToolbox or Google Postmaster Tools.
If you find your domain on a blocklist, you will need to resolve the underlying issue (such as removing compromised accounts or cleaning your email list) and then request delisting from the blocklist provider.
Step 6: Review Your Sending Volume and Domain Age
A brand-new domain has no sending reputation. Sending a full campaign from a new domain in its first week can trigger spam filters before you build any trust. The Hostinger guide notes that even a few dozen messages from a new domain can trigger spam filtering.
The solution is domain warmup: gradually increasing your sending volume over 2 to 4 weeks to build a positive reputation with mailbox providers like Gmail, Outlook, and Yahoo.
Step 7: Verify Compliance With Bulk Sender Requirements
Since 2024, Gmail (for anyone sending more than 5,000 emails per day) and Yahoo (for bulk senders) require senders to pass SPF, DKIM, and DMARC authentication, include a one-click unsubscribe link, and keep spam complaint rates below 0.3%. Microsoft's Outlook.com followed suit in 2025 with similar requirements.
The Validity report shows that 13% of senders surveyed reported a complaint rate above 0.3%, which puts them at risk of filtering or rejection. The recommended best practice is to keep complaint rates below 0.1%.
Step 8: When to Get Professional Help
If you have worked through Steps 1 through 7 and your emails are still not working, the problem likely sits across DNS records, sending tools, and mailbox provider policies that require email-specific tools and experience to diagnose. Services like Help With Emails specialize exclusively in business email: deliverability fixes, email setup, migration, auditing, and domain warmup. They work with Google Workspace, Microsoft 365, and Zoho Mail, plus marketing platforms like Mailchimp, Klaviyo, Brevo, and MailerLite.
Every job is quoted in writing before any work starts and ends with a written report showing what was found, what changed, and the evidence that it worked, including test results from tools like Google Postmaster Tools and MXToolbox.
Key Takeaways
- 83.5% of emails reach the inbox globally, meaning 1 in 6 do not (Validity)
- Only 53.8% of senders use DMARC (Sinch)
- 53% of senders do not monitor blocklists (Sinch)
- Gmail and Yahoo require complaint rates below 0.3% for bulk senders (Validity)
Microsoft is identified as the toughest major mailbox provider for deliverability, with an inbox placement rate of just 75.6%, compared to Gmail's 87.2% and Yahoo's 86.0% (Validity). If your recipients are primarily on Outlook, you may face stricter filtering than you would with Gmail users, so it is worth testing your deliverability across multiple providers.
Attachment size is another common but overlooked issue. Most email providers limit attachments to between 10 and 25 MB, and messages exceeding that limit will fail to send or be rejected by the receiving server (Hostinger). If you need to send large files, use a cloud storage link instead.
Knowing what to do if your emails are not working means following a structured process: check your MX records if mail is not arriving, isolate the failure point, check authentication, scan for blocklist issues, warm up new domains, and get professional help when the problem spans multiple systems.